Hammer mill and Pellet Mill Replacement Parts
A Worldwide Leader in Replacement Parts for Mills Since 1934.
Upcoming Events
![](https://www.jacobscorp.com/wp-content/uploads/pet-food-forum-2024.jpg)
![](https://www.jacobscorp.com/wp-content/uploads/food-with-purpose-2024.jpg)
Our Mill Products & Services
Hammer Mills
![hammers icon](https://jacobscorp.com/wp-content/uploads/hammers-icon-v2.png)
Hammers
![rods icon](https://www.jacobscorp.com/wp-content/uploads/rods-icon-v2.png)
Rods and Spacers
![](https://www.jacobscorp.com/wp-content/uploads/screen-icon-v3.png)
Screens
Pellet Mills
![](https://www.jacobscorp.com/wp-content/uploads/dies-icon-v2.png)
Dies
![](https://www.jacobscorp.com/wp-content/uploads/roll-shell-icon-v6.png)
Roller Shells
![die and roll shell rework icon](https://www.jacobscorp.com/wp-content/uploads/die-roll-shell-rework.png)
Die & Shell Rework
“My operators love the Lightning Die and would kill me if I switched back. The Lightning Die solved many of our pelleting problems!”
“The Triple Threat Hammers have been working exceptionally well on our Jones Mill. I have been very impressed. We weren’t getting the hours from [Competitor], and they were only lasting about 2 months. Jacobs has been running for 4 months and is still running for less money.”
“Our pelleting process had some inefficiencies, we were seeing rather poor performance from our process and short lifespans from our dies and rolls. . With Jacobs we built a new protocol for our process, from our feed temps, all the way through roll setups. We have been running for several months now and our pelleting production numbers are fantastic, some of our products we increased our performance by over 50%, that translates to multiple tons per week in increased efficiency. We did see an increase in all of our TPH across the board. “
When it comes to the Jacobs screens for the Andritz hammermill and the Dupps Grindor’s, the screens from Jacob’s were always more convenient to get and lasted longer the only time we would have to change them was when stainless went through the Grindor or Hammermill. Getting screens by the pallet is far more convenient than ordering by each.
While running the Andritz hammer mill we were having to change the hammers every 1-2 weeks. Once we worked with Jacob’s and change the hammers along with a few other adjustments in the pattern, we were able to get 4-5 weeks of life out of the hammers.
“Very pleased with Bad Ax Hammers. Mill has less vibration, first corner 250 to 260 hours, 2nd corner at 180-190 and still going”
“Jacobs rods last a full year with very little grooving, competitors rods needed changed out every 6 months due to excessive grooving.”
“What Chad has told me has come true, the Lightning out performed [Competitor] and the other new dies out there hands down!”
After running the Dupps Grindor’s for several months changing the Dupps hammers every 2 days, we ran a trial on the Jacob’s Hammers for the Dupps Grinder and found that we were able to get 5 days of life. We run strictly all beef and bones straight from slaughterhouses.
“The Pentagon Hammer Set we have in our Roskamp meal grinder is working very well. I’ll be buying at least two more Sets of these hammers for our other machines.”